Insurice 2000

The Everpure Insurice series of water filters are for use with ice machines to provide quality ingredient water and a reduction in scale build up from dirt and dissolved minerals in the water.

Manufactured using the pre-coat filter process it provides 0.5 micron filter protection, eliminates chlorine and other off tastes, removes cysts and organisms and inhibits the formation of mineral deposits. The inhibition will only be effective up to certain levels of alkalinity.

The Insurice 2000 cartridge is available as single or twin suitable for cubers up to 600kg per day and flakers up to 950kg per day. The single cartridge can be used in a series of heads.

Capacities of all filters may vary according to the influent water quality, the flow rate, the line pressure and the continuity of flow.

Specification

Description

Carbon block

Application

Ice Makers

Filtration Rating

0.5 micron

Operating Temp.

Not exceed 38 deg C

Operating Pressure

Max 10bar

Connections

3/8 NPT female

 

2000 Single

2000 Twin

Capacity

300kg per day

600kg per day

Dimension

H=740 W=180

H=710 W=360

Part No.

9324-01

9324-02

Flow Rate

6.3 lt/min

12.7 lt/min


Installation Tips:-

  • Choose an accessible location which is suitable to support the weight of a system.
  • Use approved pipe work and fittings Minimum 10mm bore. (seek advice on high flow systems)
  • Do not braze/solder fittings into mounting heads.
  • Never use saddle valve for connection.
  • Do not exceed service flow rate.
  • Flush cartridges to drain at full flow for 5 mins.
  • Install in accordance with water regulations.
  • Do not connect system to water cooled condenser.

Operational Tips:-

  • Change cartridges:-
    - on a regular 6 month preventative basis.
    - when a significant pressure drop occurs.
    - at least annually.
  • Always flush cartridges to drain after changing.