Insurice 4000

The Everpure Insurice series of water filters are for use with high capacity ice machines to provide quality ingredient water and a reduction in scale build up from dirt and dissolved minerals in the water.

Manufactured using the pre-coat filter process it provides 0.5 micron filter protection, eliminates chlorine and other off tastes, removes cysts and organisms and inhibits the formation of mineral deposits. The inhibition will only be effective up to certain levels of alkalinity.

The Insurice 4000 cartridge is available as triple or quad. Both are suitable for cubers up to 1000kg per day and flakers 1500kg. The flow rate of the quad is higher at 27 litres per minute.

Capacities of all filters may vary according to the influent water quality, the flow rate, the line pressure and the continuity of flow.

Specification

Description

Pre-coat & scale control

Application

Ice Makers

Filtration Rating

0.5 micron

Operating Temp

Not exceed 38 deg C

Operating Pressure

Max 10bar

 

4000 Triple

4000 Quad

Capacity

1000kg per day

1000kg per day

Dimension

H=740 W=380

H=710 W=535

Part No.

9325-03

9325-04

Flow Rate

19 lt/min

27 lt/min

Connection

½” female

 ¾” female


Installation Tips:-

  • Choose an accessible location which is suitable to support the weight of a system.
  • Use approved pipe work and fittings Minimum 10mm bore. (seek advice on high flow systems)
  • Do not braze/solder fittings into mounting heads.
  • Never use saddle valve for connection.
  • Do not exceed service flow rate.
  • Flush cartridges to drain at full flow for 5 mins.
  • Install in accordance with water regulations.
  • Do not connect system to water cooled condenser.

Operational Tips:-

  • Change cartridges:-
    - on a regular 6 month preventative basis.
    - when a significant pressure drop occurs.
    - at least annually.
  • Always flush cartridges to drain after changing.